Intellectual Property Lawyers for Arizona

Whether you need a Work For Hire Agreement really depends on the project and what both sides are trying to get out of it. You’re not automatically required to sign one, but saying yes or no to that clause can completely change who owns the work and what rights you’ll have moving forward. Just because a client calls something “work for hire” in a contract doesn’t mean it actually qualifies under the law, especially when it comes to freelance design work. Here’s the thing. Under U.S. copyright law, “work made for hire” is a specific exception to the general rule that the creator owns the work. For a freelance project to qualify, two conditions have to be met. First, both parties need to sign a written agreement that says the work is considered “made for hire.” Second, the type of work has to fall into one of nine defined categories under 17 U.S.C. § 101. These include things like contributions to collective works, audiovisual pieces, instructional texts, or compilations. The list is pretty narrow. Standard marketing materials, logos, brochures, or campaign graphics usually don’t make the cut. Courts take a strict approach here, so just checking a box in a contract doesn’t magically make it enforceable. If your project doesn’t meet both requirements, labeling it “work for hire” doesn’t hold legal weight. In that case, the default is that you, the designer, own the copyright unless there’s a separate written agreement transferring it to the client. That leads us to ownership. If there’s no valid Work For Hire clause and no assignment of rights, you retain full copyright. That gives you control over how the work is used beyond whatever license you’ve granted. So if you created a logo and the contract only licenses it for digital use, the client can’t later slap it on T-shirts or license it to a partner without getting your permission first. But if there is a valid Work For Hire clause or an explicit copyright assignment, then the client becomes the legal owner. That means they can use it, change it, resell it, or do whatever they want with it, without needing to pay you again or ask for further approval. You’d have no say over how the work is used, and unless the agreement gives you permission, you wouldn’t even be able to include it in your portfolio. If you want more flexibility, there are alternatives. You can structure the deal with a copyright assignment that still reserves certain rights for you. For example, you could keep the right to show the work in your portfolio or limit resale to direct competitors. Or you could stick with licensing. An exclusive license gives the client broad rights but you still own the work. A non-exclusive license is more limited and usually makes sense for templates or assets used with multiple clients. Portfolio rights, by the way, are often negotiable. Even in exclusive arrangements, you can add a clause that lets you show the work on your website, social profiles, or print materials. Just make sure it’s clearly spelled out. Some corporate clients won’t allow it at all unless it’s written into the agreement. From a practical standpoint, your decision should take into account how much you’re getting paid, how the work will be used, and whether you want to reuse or showcase it later. If you’re giving up all rights, price accordingly. Clients pushing for Work For Hire terms often just want clean, uncomplicated ownership, especially for branding or long-term use. But that doesn’t mean you can’t negotiate. You might agree to transfer ownership only after full payment is received. You might keep the right to use rejected drafts. You might even allow Work For Hire treatment for the final deliverables but retain some creative rights behind the scenes. Also, keep an eye out for boilerplate clauses. Some clients include Work For Hire language by default, not realizing their project doesn’t meet the legal standard. Just because it’s in the contract doesn’t make it enforceable. If the work doesn’t meet the criteria, the clause won’t hold unless there’s a separate valid assignment of rights. When in doubt, it’s smart to run the agreement by an attorney who understands copyright law and freelance creative work. Contracts Counsel connects you with attorneys who handle exactly this kind of issue.

When you're dealing with a technology transfer agreement, it's important to understand that you're not selling your software. You're licensing it. That might seem like a small difference, but it really isn't. Licensing means you're keeping ownership of your intellectual property while letting someone else use it under clearly defined terms. If you're based in Arizona, you've got a legal system that takes written contracts seriously and generally holds both parties to exactly what’s spelled out. So clarity matters—a lot. Be Specific About What's Being Licensed Don't just say you're licensing "software." Spell out what that includes. Are you talking about the source code? Object code? Documentation? APIs? Maybe there's configuration data, algorithms, or some embedded proprietary know-how. Lay it all out. Also, be clear on whether things like updates, bug fixes, or patches are part of the deal or if those require separate terms. Courts in Arizona won't guess what you meant. They’ll go by what’s in the document. Keep Your IP Rights Locked Down Make sure the agreement says you're not transferring ownership. You're only granting the rights specifically listed in the license. Anything not spelled out stays with you. Without that language, you could run into disputes later—especially if the licensee makes improvements. Want to avoid headaches? Clearly state that you own any enhancements unless you decide otherwise. Be Intentional About the License Structure Think through how you’re structuring the license. Is it exclusive, non-exclusive, or somewhere in between? An exclusive license can be powerful, but it limits your flexibility. If you're giving up other opportunities, it's reasonable to ask for higher compensation and make sure the licensee meets clear performance targets. On the flip side, a non-exclusive license gives you room to work with others. You can also narrow the license by geography, industry, or even specific use cases. And don’t forget to address sublicensing. If it’s allowed, include approval rights and make sure you’re compensated fairly if they sublicense to others. Choose a Payment Model That Reflects Value There’s no one-size-fits-all way to get paid. You might go with an upfront fee for past development work, ongoing royalties based on sales, or milestone payments tied to things like product launches or regulatory approval. Each has its pros and cons. Whatever you choose, protect yourself with audit rights. You want access to the licensee’s records if something seems off. That usually means giving them notice, checking things during business hours, and shifting the audit costs if the discrepancies are significant. Protect Your Work from Unintended Use If you’ve used open-source components, you need to disclose that—and understand how those licenses impact what you can legally offer. GPL code, for example, can bring in obligations that might not work with your business model. Copyright registration isn’t mandatory, but it gives you the ability to sue in federal court and can unlock statutory damages and legal fees. If you've developed novel algorithms, you might consider a patent—but only if the innovation meets the standards. It's not always worth the cost, so weigh that carefully. Make Sure the Licensee Does Something with Your Tech If you’re giving someone exclusive rights, set performance expectations. What does commercialization look like to you? It might mean releasing a product by a certain date, hitting minimum sales, or committing to a marketing budget. If those things don’t happen, you need a remedy—like converting the license to non-exclusive or ending the agreement altogether. The goal is to make sure your technology doesn’t sit unused. Clarify Support and Ongoing Involvement Are you expected to provide support? If so, spell out exactly what that means. Documentation, training, installation help, bug fixes, future updates—whatever it is, define it. Also decide whether that’s included in the license or billed separately. If you’re providing source code, put strict confidentiality and usage terms in place. In some cases, a source code escrow might be appropriate, with release conditions like your bankruptcy or failure to maintain the code. Limit Your Liability Arizona has adopted the Uniform Commercial Code, so if you don’t include specific disclaimers, you might be stuck with certain implied warranties. That includes things like fitness for a particular purpose. You’ll want to limit that while still affirming that you own the software and that it generally works as described. Also, set a cap on liability. Most developers limit it to the total fees paid under the agreement and exclude indirect or punitive damages. You don’t want to be held responsible for how someone else uses your tech. Mutual Indemnification Matters If someone accuses your software of infringing their intellectual property, you might agree to cover the licensee’s costs. But it needs to go both ways. They should indemnify you too—especially if they modify your code or use it in a regulated environment where compliance issues could come up. You don’t want to be liable for something outside your control. Don’t Skip Export Control Compliance Yes, export control rules apply even to downloadable software. If your product includes encryption or certain types of AI or analytics, it may fall under specific federal regulations. Many tools qualify for License Exception ENC, but that’s not automatic. Misclassification can lead to serious fines. If you're licensing internationally—or even just to a foreign-owned company based in the U.S.—you need to get this right before moving forward. Understand How Arizona Law Will Handle Your Agreement Arizona courts usually enforce what’s written. If it’s not in the contract, don’t expect the court to fill in the gaps. That makes detailed drafting essential. Arizona also supports reasonable non-competes and confidentiality terms, which isn’t true in every state. Just make sure any restrictions are tied to legitimate business interests and kept within reasonable limits for time and geography. Spell Out What Happens at the End Termination clauses are your safety net. Cover scenarios like breach, bankruptcy, missed milestones, or even changes in company control. Include cure periods where appropriate. Be specific about what happens when the agreement ends—does the licensee have to stop using the software immediately? Can they finish selling what’s already been produced? Make that clear. Also, specify which obligations survive termination. Usually, confidentiality and IP rights continue, even after the main agreement ends. Plan Ahead for Disputes Choose Arizona law to govern the agreement. If your licensee is in another state or country, decide where and how disputes will be handled. Arbitration can be quicker and cheaper, but it might limit your access to things like injunctive relief. Consider requiring mediation first to give both sides a shot at resolving issues early. And don’t forget a prevailing party clause—Arizona courts do enforce them, and it could help you recover attorneys’ fees if you end up in a legal fight. The Final Analysis Technology licensing isn't just about protecting your IP. It's about setting clear, enforceable expectations from the start. Arizona law gives you the tools to do that, but it only works if your agreement is well-drafted and forward looking. Define what you're licensing, retain ownership, protect your downside, and make sure the deal drives results, not just risk. If you're a software developer navigating a tech transfer deal or reviewing an agreement someone else drafted, don’t go it alone. Having the right legal language in place from day one can prevent years of headaches down the road.

Without seeing the handbook it would be difficult to answer your question. Generally, what an employee creates for the Company is Company property, unless you have an agreement with them that states otherwise. It would also be helpful to know if you are an employee or independent contractor. Sometimes Company's give employee handbooks to independent contractors but the classification of whether you are an employee or independent contractor is important to this analysis.

Here’s how I’d approach structuring an Employee IP Agreement if your goal is to protect your company’s intellectual property without running into enforceability issues under U.S. law. Covering Core IP OwnershipCovering Core IP Ownership First, start with a “work made for hire” clause. It’s a good foundation, but it’s not enough on its own. Under U.S. copyright law (17 U.S.C. § 101), only certain types of work qualify as “made for hire,” and many employee-created assets may fall outside that definition. So you’ll want to pair it with a present-tense assignment clause. Be specific here. Use language like “the employee hereby assigns” rather than “will assign.” That slight shift matters. It ensures the company owns the rights immediately when the work is created. Also, define “intellectual property” broadly. Don’t just list patents or source code. Include software, algorithms, documentation, trade secrets, databases, and anything tied to your business. The scope should clearly include anything created during work hours, using company tools or systems, or connected to your current or future business operations. Disclosure and Documentation You’ll want to require employees to promptly disclose any inventions or creative works they produce. Put it in writing. This gives your company the chance to evaluate whether the work is covered under the agreement. It’s also a good idea to require them to maintain proper documentation. Accurate records can make a real difference in patent filings or if a dispute ever comes up. Pre-Existing IP and Legal Carve-Outs There should be a section where employees list anything they’ve developed or own before joining the company. If they don’t list anything, the agreement should include language confirming they’re representing that no such prior inventions exist. This prevents claims down the road that something developed during employment was actually theirs from before. Now, depending on your state, you may need to include statutory carve-outs. California, Illinois, and Washington all have laws that limit how far IP assignment clauses can go. For example, in California, you’re required to carve out inventions developed entirely on the employee’s own time, without company resources, and unrelated to your business (see California Labor Code § 2870). Without that carve-out, your entire assignment provision could be thrown out. Confidentiality Obligations Make sure there’s a strong confidentiality section. This should cover source code, technical documentation, designs, product plans, customer lists, financial data, and anything else proprietary. Make it clear that the obligation continues even after the employee leaves. You’ll also want to require that all company property and digital assets are returned at the end of employment, including devices, credentials, and files. Ongoing Cooperation and Enforcement Mechanisms Include a clause requiring employees to cooperate in IP protection efforts even after they leave. That could mean signing patent paperwork or providing testimony if needed. To make that enforceable, add a power of attorney clause. This gives the company the authority to act on the employee’s behalf if they’re unwilling or unreachable. It’s a simple way to prevent delays when you’re trying to secure or enforce rights. It’s also smart to include a waiver of moral rights where allowed. This is especially useful for creative works and software. It gives the company full freedom to modify or use the work without needing future approval. Legal Remedies and General Terms Be clear that the company can pursue equitable relief, like an injunction, if there’s a violation. Sometimes monetary damages aren’t enough to prevent harm. Include a severability clause so that if one part of the agreement is invalidated, the rest still stand. Don’t forget to specify the governing law and venue for any disputes. As for restrictive covenants, keep in mind that non-compete clauses are unenforceable in California and heavily restricted elsewhere. Non-solicitation clauses may still be allowed, but they need to be narrowly written. You should have your legal team confirm their enforceability based on your state. Finally, think about consideration. For new hires, the job offer itself usually counts. But for existing employees, you’ll likely need to offer something extra, like a bonus or promotion, to make the agreement stick.

You might think that because you wrote the code, you have the right to share it, but that’s not how developer agreements usually work. In Washington State, these contracts are enforceable, and they can absolutely stop you from sharing or reusing code you created during a project. It really comes down to ownership, and under most contracts, that ownership belongs to the company, not you. Let’s Talk About Who Owns the Code When you sign a developer agreement, you’re usually agreeing to one of two things: either it’s a “work-for-hire” deal or you're assigning your intellectual property rights. Either way, the result is the same. The company owns whatever you build for them. Since they own it, they get to decide what happens to it. Even if you’re the one who wrote every line, that doesn’t mean you have the right to reuse or share it if you’ve already signed those rights away. This kind of setup is standard in the tech world. Companies need to protect their IP, especially when it includes competitive advantages or trade secrets. That’s why they ask developers to assign rights and agree to keep things confidential. What About Washington State Law? Washington does offer some protection to developers, but it’s limited. There’s a statute, RCW 49.44.140, that says employers can’t claim ownership of inventions you created entirely on your own time, using your own resources, and completely unrelated to their business. That sounds helpful, but here’s the catch. It only applies if you’re an employee, not an independent contractor. And even then, the second your work overlaps with their business or involves any company resources, the protection probably doesn’t apply. So if the code you’re writing is part of a contract, or even just loosely connected to the company’s business, then the company likely owns it. Why This Matters If you violate the agreement, you’re not just risking a slap on the wrist. The company could send a takedown notice to GitHub, file for an injunction, or even sue for breach of contract or copyright infringement. If the code includes anything proprietary, like business logic or algorithms, they might also go after you for trade secret misappropriation. And beyond the legal problems, there’s your reputation to think about. Word travels fast in development circles, especially in local communities. Getting labeled as someone who mishandles IP can make future contracts harder to land. How to Protect Yourself The good news is that you still have leverage before you sign. A lot of companies start with broad IP assignment language, but they’re often open to carving out exceptions. You can ask to include a “prior inventions” schedule that lists tools, frameworks, or libraries you already created. That way, you can keep using your own work in other projects. If open-source contribution is important to you, say so upfront. Some companies will allow developers to contribute non-proprietary or generic components to open-source projects, especially if those contributions don’t compete with their business. Just make sure it’s all clearly spelled out in writing and approved in advance. You might also negotiate a time limit on confidentiality terms. The company will likely want to own the core project code permanently. That doesn’t mean you can’t eventually talk about general techniques or patterns you used, especially after some time has passed. Smart Moves Before You Sign Before you agree to anything, take a moment to list any existing code or tools you plan to use. Try to get those explicitly excluded from the IP assignment, or at least confirm that you’ll retain the right to use them elsewhere. And again, if open-source is part of your career plan, be upfront. Get language in the contract that allows you to publish select components with written approval. If you develop a useful utility during the project and think it might have broader uses, talk to the company before the contract ends. See if they’d be open to letting you open-source it or license it back to yourself for use in future projects. When It’s Time to Bring in a Lawyer If all this feels high-stakes, and it often is, consider having a tech-savvy attorney take a look. A good lawyer can help spot overly aggressive clauses, suggest better language, and help you protect both your rights and your long-term goals. This is especially important if you’re actively contributing to open-source or if you’ve built up your own libraries over time. A little legal help now can save you a lot of trouble later.